|This product is available for pre-order only|
The RailCrew ON-OFF Remote Uncoupler sits under the roadbed to reliably uncouple locomotives, passenger or freight cars, no matter what brand of standard magnetic knuckle couplers you use. At just 1 3/4″ wide (44mm) and 7/8″ deep (22mm) it’s not much larger than a permanent magnet and can be easily controlled by DCC accessory decoders. It also features an LED between the rails that marks the uncoupling zone which only operates when in the “ON” position. This is handy to have as the uncoupler is totally hidden from view.
When the uncoupler is “off” it has no effect on the couplers on your equipmemt. That means you won’t have any unwanted uncoupling. This is really handy in large yards and on the mainline, especially near runaround tracks or industrial spurs.
This revolutionary new product features:
The RailCrew ON-OFF Remote Uncoupler is available a single unit or in a six-pack. Installation onto an existing layout is easy: drill a 1/8″ hole between the ties at the track centre line. Insert the steel centering pin (included) into your hole saw and cut a larger hole from beneath the subroadbed using the 1/8″ hole as a guide. Push the uncoupler in from below and connect the power. That’s it. If you are doing a new layout build you can do the entire installation from above.