• Length: 12"
• Angle: 9.5 degrees
• The wiring of these new turnouts is a development of both the Insulfrog and Electrfrog designs. The stock rails are wired to the center rails at the factory, which in turn are connected to the corresponding frog-rail. This means the turnout is completely live(except for the tip of the frog) with no extra wiring required. If the turnout is being used as a switch to isolate a section of track then it is a simple job to remove the wire that joins the center rail and stock rail and it will work like a current Insulfrog.
• Peco Code 83 track components are based on American Railroad Engineering Association drawings and have been designed to meet NMRA standards. This line of track is an all-new addition to Peco's dependable and durable track systems. Designed for years of reliable service, the geometry of turnouts makes it easy to combine the pieces with any crossing or slip switch that fits your track plans.
• Peco Streamline Code 83 track features ties molded in creosote-colored flexible plastic that mimics the look of the prototype, plus wood grain, tie plate and appropriate spike details. All track and turnouts feature the correct prototypical tie spacing and all are DCC friendly.
• Instructions are included.

Peco Streamline Code 83 track features ties molded in creosote-colored flexible plastic that mimics the look of the prototype, plus wood grain, tie plate and appropriate spike details.