Digitrax LocoMotion™ System:
Your locomotives look like the real thing. The Digitrax LocoMotion™ System makes them run like the real thing, too!

• Torque Compensation for smooth as silk silent operation.
• 128 Speed Step operation (14 or 28 steps can also be used).
• Momentum with acceleration and deceleration.
• Normal Direction of Travel is user selectable.
• Switching Speed feature for easier and faster access to yard speeds.
• 3 Step Speed Tables set start, mid and max voltage for custom control.
• 28 Step Speed Tables with 256 level resolution for precise control.
• SuperSonic™ motor drive for silent operation.
• FX3 Function outputs for prototypical lighting effects and on/off control:
• Constant Brightness Lighting with directional or independent control
• Realistic Effects like Ditch lights, Mars lights, strobes, and many more.
• FX3 & Standard Function Qualifiers operate functions based on direction,
• F0 on or off, direction and F0, and whether loco is moving.
• Function Remapping for custom function setup.
• Master Light Switch turns off all lights & functions with one keystroke.
• Advanced Consist Function Controls
• Decoder Lock equipped
• Transponder equipped ready for transponding on your layout.
• All Mode Programming with Operations Mode Read Back reads back CV values right on the mainline.
• Decoder Reset CV with or without speed table reset.
• Motor Isolation Protection prevents damage to your decoder.
• Basic, Advanced & UniVersal Consisting
• 2 Digit and 4 Digit Addressing
• DCC Compatible
• FCC Part 15, Class B RFI compliant

Specifications:

• Current Rating-Motor: 1.25 Amp (2.0 Amps Peak)
• Size: 0.39” x 1.34 x .1” (9.91mm x 34.04mm x 2.54mm)
• Installation: Board replacement for Kato NW2
• Function Outputs: 2-500mA
• Function Type: FX3 
• Features: Economy Series 3
• Warranty: No Worries Warranty (manufacturer program)