NOTE: WE DO NOT SELL THIS ITEM IN USA WINTER MONTHS - PRODUCT IS FREEZABLE AND WILL BE DAMAGED IF FROZEN IN SHIPMENT.

What is it?

It is a sophisticated, specially secret formulated, room temperature curing, one-part “green” liquid plastic with very unique properties. BULLFROG SNOT was concocted and brewed by a veteran N-scaler specifically to be the ideal solution for improving traction on model railroads, but it can surely apply to numerous other quirky little problems (Monorails, turntables, slot cars, Lego wheels, driveshaft couplings on engines and switch machines, as a DCC insulator, sewing machines, etc.) left to be discovered by your creative fertile imagination.

What makes it so great?

• It is easily applied, and easily removed. Just a toothpick is all you'll need to install, an Xacto knife to remove.
• It's ready to go - no multi-part mixing. No witches brew of acetone, RTV, buffalo glue, snake oil, belt dressing, two-sided tape, shrink tubing, chicken bones, eye of newt, or dilithium crystals.
• No disassembly, no special tools, no surgical skills.
• It cures at room temp in moments. No baking. No nasty fumes. It's benign and friendly.
• Can be thinned with plain 'ol water, if so desired.
• It's easy to see your work, and it cures to virtually invisible.
• It is thin - only .0055" or less when cured.
• It's tough and durable. Has a good service life.
• Leaves no residue on the track, and no gunk in your engine.
• Universal - works for any loco from any manufacturer in any scale.

How is it installed?

• Using a toothpick, apply one or two drops to a rotating driver (power the belly-up loco). BULLFROG SNOT forms a thin, very grippy plastic traction tire, virtually invisible after it cures.
• Thin with water to meet your purpose. Z-scalers like it thin and apply with a fine brush. O-scalers use a trowel (so we've heard). Mix like you would epoxy. The water goes away as the BULLFROG SNOT cures.